Flushes out and cleans the engine from the inside. Highly effective cleaning additives dissolve sludge and lacquer formers, envelope solid dirt particles and liquid contaminants. These substances are then drained along with the motor oil during the oil change. Engines stripped of deposits and contaminants then can unfold their full output when clean oil is filled. For cleaning and flushing out the oil circuits of gasoline and diesel engines. The use of Motor Flush is dependent on the degree of contamination of the oil circuit. Not suitable for use in motorbikes with wet clutches. Application: A 250 ml can is sufficient for up to 3.5 liters of oil. Add Motor Flush to the motor oil at running temperature before changing the oil. After it has been added, let the engine idle for 10 – 15 minutes. Then change the oil and the filter. Motor Flush is compatible with all commercially available motor oils.